An estimated 356,000 in-home fires caused more than $7 billion in U.S. residential property damage in 2009, according to data from the United States Fire Administration.

The fires caused more than 12,000 injuries, and killed more than 2,500 people in Irvine and nationwide.

Unfortunately, many of affected homes did have smoke detectors — they just weren’t working properly. This is why it’s critically important to test your home’s smoke detectors at least once annually.

When you test a smoke detector, you’re making sure that the alarm will trigger in the event of a real-life fire. A proper test will confirm that the batteries have useful life, and that the device’s smoke detection components are operating as expected.

To test your smoke detector, here’s what to do :

1. Make a checklist of your home’s smoke detectors
2. Go to the first smoke detector
3. Ask a helper to go to the farthest point from the detector within your home
4. Press the smoke detector’s testing button up to 10 seconds to activate the alarm
5. Confirm with your helper that the alarm could be heard from his/her location
6. Note on the checklist whether the smoke detector worked, or needs replacement

You can also take your test a step further.

Just because the smoke detector’s alarm can be heard from the farthest point in your house doesn’t mean that the alarm will sound in the event of a real fire. Therefore, you may want to buy a “smoke test”.

Smoke tests are aerosol cans that simulate a bona fide in-home fire. You can buy them for less than $15 at your local hardware store, or at Amazon.com. If your smoke detector fails to sound its alarm in the presence of a “real fire”, make sure you replace it right away.

In the housing market, amenities and location have as much to do with a home’s value as the everyday forces of supply-and-demand. Whereas the latter causes home values to rise and fall over time, the former creates a starting point for said values. 

Where you live — and the features of your home — determine your home’s price range. Naturally, homes in some areas are consistently higher-valued than homes in others.

Using data compiled by real estate market data firm Altos Research, Forbes Magazine presents America’s 10 most expensive ZIP codes. California and the New York Metro area dominate the list.

1. Alpine, NJ (07620) : $4,550,000
2. Atherton, CA (94027) : $4,295,000
3. Sagaponack, NY (11962) : $3.595,000
4. Hillsborough, CA (94010) : $3,499,000
5. Beverly Hills, CA (90210) : $3,469,891
6. New York, NY (10012) : $3,392,574
7. New York, NY (10013) : $3,317,962
8. Water Mill, NY (11976) : $3,300,000
9. Montecito, CA (93108) : $3,099,348
10. Old Westbury, NY (11568) : $3,095,000

In fact, of the top 50 most expensive ZIP codes, only 6 are located outside of California and New York regions. 3 are Colorado resort towns — Snowmass (81654), Aspen (81611) and Telluride (81435) — one is in Maryland, one is in Florida, and the last is in Washington State.

Chicago-suburb Kenilworth (60043) is the top-ranked Midwest ZIP code. It placed 86th overall.

The Forbes list may be interesting but, to home buyers or sellers in Newport Beach , it should not be the final word in home values. Real estate is a local market which means that — even within a given ZIP code — prices can vary based on street and neighborhood.

Look past general data and get specific. Talk to your real estate agent for local market pricing.

Wednesday, the Federal Open Market Committee voted to leave the Fed Funds Rate unchanged within its current target range of 0.000-0.250 percent.

The vote was nearly unanimous, with just one dissenting voter. There were 3 dissenters at each of the FOMC’s last two meetings.

In its press release, the Federal Reserve presented an improved outlook for the U.S. economy, noting that since its last meeting in September, there’s new evidence that the economy “strengthened somewhat” in the third quarter.

One example cited is that consumer and business spending continues to rise while inflationary pressures on the economy remain modest. This indicates controlled growth — a plus in a recovering economy.   

The economy remains slowed by a number of factors, though, as noted by the Fed :

1. “Continuing weakness” in the labor market
2. Softness in commercial real estate
3. A “depressed” housing market

In response to mixed economic conditions, the FOMC opted to “do nothing” today; it introduced no new monetary policy, and revised none of its existing market stimulus. The Fed re-iterated its plan to leave the Fed Funds Rate in its current range near 0.000 percent “at least until mid-2013″ and affirmed “Operation Twist” — the program in which the Fed sells Treasury securities with a maturity of 3 years or less, and uses the proceeds to buy mortgage bonds with maturity between 6 and 30 years.

Mortgage market reaction to the FOMC statement has been negative this afternoon. Mortgage rates throughout California are rising because analysts expected the Fed to launch new, bigger stimulus plans. It didn’t. Rates may drift higher for the new few days, too.

Therefore, it today’s mortgage rates fit your household budget, consider locking in a mortgage rate. Mortgage rates are very low right now, relative to history. It may not last.

The FOMC’s next meeting — its last scheduled meeting of the year — is December 13, 2011.

Within the next 48 hours, mortgage rates may get bouncy. The Federal Open Market Committee will adjourn from a 2-day meeting and October’s Non-Farm Payrolls report is due for release.

Of the two market movers, it’s the Non-Farm Payrolls report that may cause the most damage. Rate shoppers across California would do well to pay attention.

Published monthly, the “jobs report” provides sector-by-sector employment data from the month prior. It’s a product of the Bureau of Labor Statistics and includes the national Unemployment Rate.

In September, the economy added 103,000 jobs, and job creation from the two months prior was shown to be higher by 99,000 jobs higher than originally reported. This was a huge improvement over the initial August release which showed zero new jobs created.

When September’s jobs report was released, mortgage rates spiked. This is because of the correlation between jobs and the U.S. economy. There are a lot of economic “positives” when the U.S. workforce is growing.

1. Consumer spending increases
2. Governments start more projects
3. Businesses make more investment

Each of these items leads to additional hiring, and the cycle continues.

Wall Street expects that 90,000 jobs were created in October 2011. If the actual number of jobs created exceeds this estimate, it will be considered a positive for the economy, and mortgage rates should climb as Wall Street dumps mortgage-backed bonds in favor of equities.

Conversely, if the number of new jobs falls short of 90,000, it will be considered a disappointment, and mortgage rates should rise.

There is a lot of risk in floating a mortgage rate today. The Federal Reserve could make a statement that drives rates higher, and Friday’s job report could do the same. If you’re under contract for a home or planning to refinance, eliminate your interest rate risk.

Lock your mortgage rate today.

The Federal Open Market Committee begins a scheduled, 2-day meeting today, the seventh of its 8 scheduled meetings this year, and the eighth Fed meeting overall.

The FOMC is a 12-person sub-committee within the Federal Reserve. It’s the group responsible for setting the nation’s monetary policy and is led by Federal Reserve Chairman Ben Bernanke.

The FOMC’s most well-known role is as the steward of the Fed Funds Rate. This is the overnight rate at which U.S. banks borrow money from each other. The Fed Funds Rate is a unique, “banking” interest rate, and should not be confused with consumer interest rates, a category which includes ”mortgage rates”.

Mortgage rates are not set by the Federal Reserve. 

Rather, mortgage rates are based on the price of mortgage-backed bonds. If mortgage rates correlated to the FOMC’s Fed Funds Rate, the chart at right would be linear.

That said, the FOMC does exert influence on mortgage markets.

After its FOMC meetings, the Federal Reserve issues a press release to the public. In it, the central banker summarizes economic conditions nationwide, highlighting threats to the economy and areas of strength.

When the Federal Reserve’s statement is generally “positive”, mortgage rates tend to rise. This is because a strengthening economy invites investors to assume more risk, spurring equity markets at the expense of all bonds types, including the mortgage-backed kind.

When bond markets lose, mortgage rates rise.

Conversely, when the Fed is generally negative, bond markets gain, pushing mortgage rates lower throughout California.

The Fed can also influence mortgage rates via new policy.

At its last meeting, the FOMC launched a new, $400-billion round of mortgage-market stimulus known as Operation Twist. The added mortgage-bond support led mortgage rates lower post-FOMC meeting. 

The Fed may expand Operation Twist as soon as Wednesday afternoon. It may also take no such steps at all. Unfortunately, there are few clues about what the Federal Reserve may do next, if anything at all. As a result, mortgage rates will be a moving target for the next 36 hours. First, they’ll be volatile before of the Fed’s statement. Then, they’ll be volatile after the Fed’s statement.

Even if the Fed does nothing, mortgage rates will change so your safest play is to lock a mortgage rate ahead of Wednesday’s 2:15 PM ET adjournment.

There too much risk in floating.

ceiling-fans-november-energy-costs
http://joansimonoff.wordpress.com

ceiling-fans-november-energy-costs
http://joansimonoff.wordpress.com

ceiling-fans-november-energy-costs
http://joansimonoff.wordpress.com

November is here with many parts of the country are already feeling the chill. This weekend, a nor’easter dropped up to 20 inches of snow in cities along the eastern seaboard  – a reminder that winter is coming.

No matter where you live, though, the seasonal change in temperature throughout Irvine serves as an excellent reminder to reset the blades on your home’s ceiling fans.

Ceiling fans don’t warm or cool air, specifically. Instead, they circulate air which can have the effect of making a room feel warmer in the winter months, and cooler in the summer months.

When it’s cold outside, ceiling fans push warm air down from the ceiling, balancing the heat within a room. This can make a room feel 4-6 degrees warmer. Then, during warmer months, ceiling fans push a room’s cold air back into circulation, which creates a windchill effect, of sorts.

This, too, can change a room’s temperate 4-6 degrees.

The secret to a ceiling fan is in the rotation direction of its blades. 

• When fan blades rotate clockwise, the fan makes a room feel warmed
• When fan blades rotate counter-clockwise, the fan make a room feel cooler.

This Weather Channel video explains how it works.

If your home is without ceiling fans, consider installing one (or more). Ceiling fans are economical and “green”, using the equivalent energy of a 100-watt light bulb, while lowering your home’s energy costs.

Plus, they’re relatively simple to install. 

Tutorial videos are available online for the do-it-yourselfers, or just call a qualified electrician for assistance.

Installing a ceiling fan is a 1-hour project.

pending-home-sales-index-september-2011
http://joansimonoff.wordpress.com